DTF Transfer Application Instructions

Created by Jake Adams, Modified on Sun, 24 Sep 2023 at 02:10 PM by Jake Adams

Recently ordered DTF gangsheets from us? Below you'll find all you need to know on how to properly press your transfers for the most consistent quality prints, every time. 


100% Cotton Material:

 

  1. Preheat the garment for 10 seconds to remove excess moisture. Let the garment cool before adding the transfer.
  2. Place the transfer on the shirt white side down, image facing up.
  3. Press at 150c for 10 seconds under very firm pressure.
  4. Remove the garment from the press and let it stand until it is warm enough to peel.
  5. Peel warm or cool.
  6. Cover the image with parchment paper and press again for 10 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.

 

Poly or Poly/Cotton Mix Material:

 

  1. Preheat the garment for 10 seconds to remove excess moisture. Let the garment cool before adding the transfer.
  2. Place the transfer on the shirt white side down, image facing up.
  3. Press at 120c for 15 seconds under very firm pressure.
  4. Remove the garment from the press and let it stand until it is warm enough to peel.
  5. Peel warm or cool.
  6. Cover the image with parchment paper and press again for 10 seconds. You can use a Teflon sheet, butcher paper, or tissue paper.

 

***Please note: If the image does not come off completely, repress with the image in place, let it cool, and repeel the film.


Care Instructions:

There is no need to follow specific care instructions for DTF transfers, to ensure you transfer prints are long lasting, follow the care/washing instructions of the garment you're using. 

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select atleast one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article